|
|
QUICK PRODUCT
DETAILS
S-Cargo Motorcyle Tie Down System | Park-n-Move™
Helmet Assisted Radar Detection (H.A.R.D.) System | Adjustable
Windscreen Mount
Radar Box | Logo
Wear | Mirror
Sticker | Radar
Detectors
|
|
Park-n-Move™
Voted "Innovation of the Month
by Motorcycle Consumer News
(article)
|
|
DESCRIPTION:
The Park-n-Move™ is a device, invented
and manufactured by LEGAL SPEEDING,
which easily allows a rider to park and move their motorcyle anywhere
in the garage or shop. When space is an issue the Park-n-Move™ allows
one person to easily park their motorcycle in any location they
desire in the garage.
BENEFITS:
The primary benefits of the Park-n-Move™ are:
1. Park
Your Motorcycle ANYWHERE – The Park-n-Move™ has
four 360° heavy-duty casters allowing your motorcycle
to be placed anywhere room is available. Valuable floor
space in your garage is used in the most efficient manner.
2. No Modifications to Your Motorcycle – The Park-n-Move™ utilizes
the centerstand found on many of today’s motorcycles. Simply
roll the Park-n-Move under the bike, fold down your centerstand,
and move your motorcycle anywhere in the garage.
3. Park Multiple Motorcycles - The Park-n-Move™ can
help you locate all the motorcycles in your garage. Have
a Park-n-Move™ for each bike and quickly
roll whatever motorcycle out you want to ride. No more
having to move all your motorcycles to get at the one you want.
4. Dual Locking Casters – The Park-n-Move™ has
locking heavy-duty casters. The locking casters secure
the Park-n-Move™ in place while you
load and unload your motorycycle. The locking casters also
anchor your motorcycle once parked. No need to worry about
it rolling out of place.
5. One Person Operation – The Park-n-Move™ was
designed for one person to easily move a motorcycle where room
is at a premium. No more wrestling your bike back and forth
to position it in the place you want.
6. Low
Profile Design – The Park-n-Move™ design
is low to the ground. Minimal effort is required to
place the bike on the Park-n-Move™.
7. Compact Design – The Park-n-Move™ is
a single piece design that stores out of the way when not in
use. Hang it from the wall, put it on a shelf, or lean it up
against a wall. Space in your garage is maximized.
BUY NOW | VIEW
PICTURES | TOP
OF PAGE
|
|
|
S-Cargo
Straps
"The world's best tie down system"
|
|
The S-Cargo Strap is the first ever tie down to be a fully engineered, self-contained strap system that addresses the issues of: Storage, Damage Protection, and Safety.
HIGHLIGHTS:
- Clean and simple storage
- Convert your existing straps to eliminate tangles
- Protects bike from damage
- Extra safety by securing loose strap ends
- 1300 pound strength rating
- Coated hooks to prevent scratches
- Optional integrated soft loop on one strap end for extra protection
- Weather resistant construction
- Ventilated pouch allows straps to dry
LEARN
MORE BUY
NOW
|
|
H.A.R.D. System Redesign Status
The Helmet Assisted Radar Detection (H.A.R.D.) System has been a very popular radar detector accessory for motorcyclists around the world since being introduced in 2001. Over the years there have been many changes, some subtle, some significant.
At the present time, the H.A.R.D. System is under going a major re-design. During the re-design, we made the decision to remove the H.A.R.D. System from the market in order for us to concentrate all our engineering and design resources on the new version. We will not be releasing all the new features. But as a teaser, here are a few of the new features:
- Auto off – the H.A.R.D. System (V5) receiver will shut itself off automatically after a set amount of time (eight hours of use). Before shutting itself down, the receiver will flash to notify rider of shut down. If the rider wants to keep the receiver on, simply touch the on / off switch and the eight hour timer starts over.
- Weather Proof – the latest H.A.R.D. System receiver had a waterproof design. The new system will have both the receiver and transmitter designed to operate in adverse conditions.
- Standard Batteries – the H.A.R.D. System V5 will utilize standard, off the shelf batteries that will provide a cost effective power source. There is a possibility of having a rechargeable option.
- Compatible with the leading radar detectors – The H.A.R.D. System V5 will be compatible with the radar detectors from Adaptive, Beltronics, Escort, and Valentine.
- Plug-n-Play Design – the H.A.R.D. System V5 will keep the simple plug-n-play design that has made it so popular over the years.
At LEGAL SPEEDING we pride ourselves on using our own riding experience and those of other riders in the development and refinement of our products. We are open to any suggestions from experienced riders who are familiar with the use of radar detectors on motorcycles.
Time frame for the H.A.R.D. System V5 to be available has not been defined. The H.A.R.D. System V5 will be extensively tested and certified before general release. We are anticipating the official release to be no later than Bike Week 2012 in Daytona Beach, Florida.
Want to be a beta tester? Want to be notified when the H.A.R.D. System V5 is available? Let us know: info@legalspeeding.com
|
|
| |
|
H.A.R.D.
System Components
|
|
Transmitter - If you are a rider
with multiple motorcycles or detectors and want to have a transmitter
dedicated to each of these, extra transmitters can be purchased.
All transmitters are compatible with existing receivers therefore
you do not need to worry about matching transmitters and receivers. All transmitters are shipped with
Velcro included and the appropriate Installation and Usage guide. Buy
Transmitter Now
UPDATE: We are currently only offering the Valentine Version transmitter at this time.
DOWNLOAD the
Troubleshooting Guide
BUY NOW | VIEW
PICTURES | TOP
OF PAGE
|
|
|
Adjustable
Windscreen Mount |
|
CLICK
HERE to
view pictures of the Adjustable Windscreen
Mount | BUY
NOW
DESCRIPTION:
The Adjustable Windscreen Mount (AWM) is a
mounting option for motorcyclists to hold a radar detector or
other gadgets directly to the motorcycle windscreen. The AWM allows
a rider to place a gadget in a location where it is easy to see
and space is at a premium. The AWM comes in
two versions: a Bolt On version and an adhesive mounted version. The
Bolt On version (AWMB) requires two holes be
placed in the windscreen. The adhesive version (AWMVHB)
uses 3M VHB (very high bond) two-sided adhesive tape.
BENEFITS:
The primary benefits of the Adjustable
Windscreen Mount (AWM) are:
1. Holds Multiple Gadgets – The AWM can
hold a wide range of gadgets such as radar detectors, cell
phones, iPods, prepaid tollway cards, PDA’s, satellite
radios, and MP3 players. Now a rider only has to buy a
single mount to hold any device.
2. Fits Any Motorcycle Windscreen – the AWM fits all motorcycle
windscreens making it easy to choose the proper mount for your
motorcycle. Any model motorcycle from sport bikes to touring
models can mount devices to their motorcycle. Now a rider only
has to buy a single mount for any motorcycle.
3. Places Gadgets in an Easy-to-See Location – The AWM can be mounted anywhere on the windscreen holding the gadget
where it is easiest to see while riding. By placing the gadget
closer to your line of sight the transition between viewing the
road and gadget is made quickly and safely.
4. Weather and Damage Protection – The AWM places the gadget
behind the windscreen. This protects the gadget from weather
and other debris damage. The gadget is also out of the way of
the rider, tank bag, handlebars, and fairing.
5. Secure Mounting Solution – The AWM uses a combination
of rubber grips and a heavy duty Velcro strap to anchor the gadget.
This two-fold anchor method eliminates the chance of losing an
expensive gadget while riding.
6. Quick Release – The AWM allows the rider to quickly
remove the gadget by releasing the Velcro strap. Now the rider
can easily take gadgets off the bike when taking a break or when
the ride ends.
7. Two Versions – The AWM is
available in two versions: a Bolt On (AWMB)
and an Adhesive version (AWMVHB). A
rider now has the choice of how to adhere the AWM to
their motorcycle.
DETAILS:
The Adjustable Windscreen Mount (AWM) was designed for motorcycles
having a windscreen. The windscreen can have an angle ranging
from being horizontal (as found on sport bikes) to being vertical
(as found on cruisers). Once mounted to the windscreen, the AWM adjusts to provide a horizontal surface to place a gadget either
on top of or underneath the AWM. The gadget is secured against
the AWM by the use of rubber grips and a heavy duty Velcro strap.
It should be noted that the AWM has an infinite angle range.
Once the AWM is mounted, the rider can tilt the AWM to the preferred
angle to see and operate the gadget. There is no need to buy
another bracket or holder to tilt the gadget. Two adjustment
screws located on the AWM accomplish any angle adjustment, or
tilting of the gadget.
Installation
and Usage Guides
AWMB
(Bolt-on version)
AWMVHB
(Adhesive version)
The AWM is attached to the motorcycle windscreen
by placing two small holes through the windscreen OR by
using 3M VHB adhesive tape. Placing holes through the windscreen
is easy and can be done without the chance of damage by using
one of the three methods listed below:
1. A Dremel tool using any one of the many grinding / drilling
bits.
2. A heated wire to ‘push through’ or melt a hole
in the windscreen.
3. Using a professional shop familiar with modifying plastics.
The AWMVHB, which uses 3M VHB adhesive tape,
has been rated by 3M engineers to hold up to 16lbs! Given
this high weight rating, we guarantee it will hold a ten-ounce
radar detector. The LEGAL SPEEDING team
has been running an AWMVHB since May 2008 holding
various radar detectors without any issues.
The Adjustable Windscreen Mount (AWM) consists of the following
components:
1. Mount Plate and Brackets
2. Heavy Duty Velcro Strap
3. Hardware Kit
The AWM Plate and Brackets are tooled from billet aluminum.
Once tooled, all parts are powder coated for long life and durability.
All hardware components are stainless steel to avoid any chance
of rust or discoloration. Once mounted to the windscreen, Hinged
Screw Covers provide a factory OEM look and feel to the AWM.
The gadget is anchored to the AWM by a heavy duty Velcro strap
holding the gadget against a number of rubber grips.
Please note, the AWM is NOT
compatible with the Radar
Box or the Radar
Cover
which are also products offered by LEGAL
SPEEDING.
BUY NOW | VIEW
PICTURES | TOP
OF PAGE |
|
Radar
Box |
|
DESCRIPTION:
The Radar Box is an enclosure that provides
weather protection and security for all radar detectors.
BENEFITS:
1. Fits all Radar Detectors – All windshield mounted
radar detectors sold today fit inside the Radar
Box. This allows
any automotive radar detector to be used on a motorcycle.
2. Weather and Damage Protection – The Radar
Box places
the radar detector inside a polycarbonate housing. This protects
the radar detector from weather and other debris damage.
3. Security for the Radar Detector – The Radar
Box covers
the radar detector with a painted polycarbonate enclosure.
This hides the radar detector from being seen by less-than-ethical
people wanting your expensive detector.
4. Compatible with Existing Mounting
Solutions – The
Radar Box fits leading mounting solutions
for motorcycles. If already using a RAM or similar mounting
system, the Radar Box is 100% compatible which eliminates the
expense of a new mounting system. RAM components not included
with the Radar Box.
5. Compatible with Existing Shelf Systems – The Radar
Box can be mounted directly to any flat surface. If a shelf
system is mounted on the motorcycle, the Radar
Box can be mounted
directly on the shelf, which eliminates the expense of replacing
the current shelf system.
6. H.A.R.D. System Compatible – The H.A.R.D. System
transmitter can be placed inside the Radar
Box. The H.A.R.D. System is now protected
from weather and other types of damage.
DETAILS:
The Radar Box is made up of two main pieces: the top or enclosure
section, and the bottom or plate.
The top of the Radar Box is a thermoformed polycarbonate enclosure.
The enclosure is clear front and back and painted black on
three sides to keep unwanted eyes off your radar detector.
The interior dimensions of the enclosure are 5.3 x 3.6 X 1.25
inches. This allows room for the longest detector, the Escort
9500ix, and the widest, the Valentine, and the tallest, the Escort Redline. The Radar
Box is sized
to allow for use of the H.A.R.D. System. The H.A.R.D. System
transmitter can be placed inside the Radar
Box along with the
detector.
The bottom or "plate" is made from high-impact UV
- resistant polypropylene. Stainless steel hardware is included. The plate has two blind countersunk
holes drilled that can be used to attach a RAM ball (RAM components
not included with the Radar Box) or to
screw onto a flat surface -- you just need to finish drilling
the hole.
Placing the radar detector inside the Radar
Box is easy and
outlined in the following steps.
1. The radar detector is secured in place on the plate using
Velcro (included). The securing of the detector to the plate
avoids movement by the detector inside the enclosure.
2. The enclosure is placed over the plate.
3. Four thumbscrews are inserted to hold the enclosure to the
plate and make it easy to open and close the Radar
Box.
BUY
NOW | VIEW
PICTURES | TOP
OF PAGE |
|
Official
Logo
Wear
T-shirt

Regularly $15. Now only $10!
|
|
LEGAL SPEEDING offers the
"Speeders
Anonymous" design
which is the only known support group created with the ‘spirited
rider’ in
mind.
The Speeders Anonymous t-shirt is available
in Meduim size. This means some of you either
need to go to the gym or stop Super Sizing your meals. The t-shirts
are high quality name brand made of 100% cotton.
There is two-color printing on both sides. The front has the LEGAL
SPEEDING logo
over the left chest. Click
Here to see the front chest design. The back of the shirt
contains the design shown above.
BUY
NOW | VIEW
PICTURES | TOP
OF PAGE |
|
Mirror Sticker

|
LEGAL
SPEEDING offers special
a Mirror Sticker to help remind us ‘spirited
riders’ about
vehicles in our mirrors.
On all cars, the passenger side view mirror states, “Objects
in mirror are closer than they appear.” Well for
us motorcyclists many times the opposite is true. As a
matter of fact, many times those vehicles behind us seem to be
getting farther away. Must be some type of gravity or earth
rotation thing. To make sure we recognize this fact, it
is time we have a mirror statement of our own.
The LEGAL SPEEDING Mirror
Sticker easily adheres to any mirror. The
color is a light grey that allows for an unobstructed view like
that of the auto mirror version. The type-style is an ‘etched’ look
also like that found on auto mirrors. The outside dimensions
of the Mirror Sticker is 5/8” (.625”)
x 3” (3.000”)
so it is small enough to fit all motorcycle mirrors. The
text size is 3/8” (.375”) x 2 5/8” (2.625”)
so if needed the sticker can be cut smaller to fit certain after
market mirrors. Click Here to see an image of the LEGAL
SPEEDING Mirror Sticker. A total
of four (4) stickers are included for each order. That’s
right four! Put
them on all your mirrors!
BUY
NOW | VIEW
PICTURES | TOP
OF PAGE |
|
Radar Detectors
and Components |
|
DESCRIPTION:
LEGAL SPEEDING is an authorized dealer for Escort radar detectors.
Time and time again, the products from Escort rank in the top
or are the flat out winner in overall value and performance.
We can sell any Escort product. However, we choose to sell only
two: the Redline and the Passport
8500 X50 Red.
The ESCORT RedLine is the most advanced radar, laser and safety detector ever designed by ESCORT. The ESCORT RedLine includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rear laser detection, dual antennae with varactor-tuned (VTO) microwave receiver, digital signal processing (DSP) for superior range and reduced false alarms, patented Mute and AutoMute, audible and visual band alerts, and all the performance you'd expect from ESCORT.
Hailed as the most revolutionary radar / laser
detector ever, the
Passport 8500 X50's new "V-Tuned" radar
receiver provides extreme detection range on all police radar;
conventional and "instant-on" radar,
including the new POP mode radar threat, X-Band, and up to 50%
more range than the original Passport 8500 on the all-important
K and Ka bands. Digital signal processing (DSP) provides maximum
range, with minimum false alarms. The Red version (this indicates
the LED screen is red in color) is the best choice for motorcyclists
as red is the easiest color to see outdoors.
Still not convinced? Click
Here to be taken to the Escort Radar corporate site and
read twelve complete reviews by some of the leading motorcycle
and automotive magazines.
Escort Direct Wire Cord - The Escort
Direct Wire Cord is the recommended and preferred
way to power the radar detector on a bike. By using the Escort
Direct Wire Cord on the bike, the Escort radar detector
can easily move between the car and bike without worrying if
a power cord will be there. The Escort Direct Wire
Cord is always on the bike and the
cigarette lighter power cord (this was included with the Escort
radar detector) will be in the car. Click
Here to
see pictures of the Escort Direct Wire Cord.
BUY
NOW | VIEW
PICTURES | TOP
OF PAGE |
| |
|